Product ID:1072 FIXER HARDENER PART B 176-060C/T
MSDS Date:06/15/1987
FSC:6750
NIIN:00-965-4846
Kit Part:Y
MSDS Number: BQKQM

CLAYTON CHEMICAL CO.

13310 FIGUEROA STREET
LOS ANGELES, CA 90061
US

Emergency Phone: 310-538-9530

Info Phone: 310-538-9530

Preparer: JOHN B. TAYLOR

Cage: 61803

CLAYTON CHEMICAL CO.

LOS ANGELES, CA 90061 US

Telephone: 310-538-9530/800-424-9300(CHEMTREC)

Cage: 61803

ALUMINUM SULFATE (SARA III)

CAS: 10043-01-3

RTECS: BD1700000

Fraction By Weight: 41% %

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL IS A CORROSIVE ACID SOLUTION
AND WILL CAUSE IRRITATION AND BURNS TO EYES, SKIN, RESPIRATORY
TRACT AND GASTROINTESTINAL TRACT. INGESTION WILL RESULT IN BURNS TO
THE MOUTH, THROAT, AND GASTROIN TESTINAL TRACT. CHRONIC: PROLONGED
EXPOSURE MAY LEAD TO DELAYED EFFECTS INCLUDING SCARRING AND
INFECTION OF LIVER/KIDNEY
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE AND SKIN BURNS DEVELOP IMMEDIATELY.
INGESTION MAY CAUSE ABDOMINAL PAIN, NAUSEA, VOMITING, HEMORRAGING,
AND PERFORATION OF ORGANS.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN AND
RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid:EYES: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH
AFFECTED AREA WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR.
GIVE OX YGEN IF BREATHING IS DIFFICULT. GIVE ARTIFICIAL RESPIRATION
IF VICTIM IS NOT BREATHING. INGESTION: DO NOT INDUCE VOMITING. GIVE
VICTIM LARGE AMOUNTS OF WATER TO DILUTE MATERIAL. GET MEDICAL
ATTENTION.

Flash Point:NONFLAMMABLE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL AS APPROPRIATE FOR SURROUNDINGS.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT, ELIMINATE SOURCES
OF IGNITION, AND VENTILATE AREA AS REQUIRED. ABSORB SMALL SPILL
WITH INERT MATERIAL (SAW DUST, SAND, OIL DRY ETC.) PLACE WASTE IN
DOT APPROVED CONTAINER FO R DISPOSAL.
Neutralizing Agent:SODA ASH OR SODIUM BICARBONATE (SMALL SPILLS)

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA AWAY FROM SOURCES OF IGNITION. KEEP CONTAINER CLOSED WHEN NOT
IN USE. PROTECT FROM PHYSICAL DAMAGE.
Other Precautions:CORROSIVE MATERIAL - AVOID CONTACT WITH SKIN, EYES,
AND CLOTHING. AVOID BREATHING VAPORS.

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXPOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS
PER CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND
NIOSH-RESPIRATOR SELECTION.
Ventilation:MECHANICAL (GENERAL) VENTILATION IS USUALLY ADEQUATE.
Protective Gloves:ACID RESISTANT GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES OR FACE SHIELD
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
WORK CLOTHING AND APRON AS REQUIRED TO AVOID PROLONGED OR REPEATED
CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING OR DRINKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
CORROSIVE MATERIAL - AVOID CONTACT.

HCC:C1
Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:NO DATA
Vapor Pres:NO DATA
Vapor Density:NO DATA
Spec Gravity:2.5
pH:1.8
Evaporation Rate & Reference:NO DATA
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS, NO ODOR

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.